Description

Vittra APS UNIQUE Flow

Vittra APS UNIQUE Flow is a Light-curing fluid Composite of low viscosity, with a single shade for all dental shades.

• Bisphenol A (BPA) free;

• Exclusive APS Technology;

• Chameleon effect.

VITTRA APS UNIQUE FLOW - BENEFITS

✔ Chameleon effect

Happens in function of the chromatic mirroring features of the Composite which is capable of capturing and reflecting the shade of the dental substrate.

✔ Making of attachments

For invisible orthodontic aligners.

✔ Ideal flow

Does not run off.

✔ APS Technology

Longer working time in illuminated operative ambient. Total predictability of shade even before photopolymerization. Increased mechanical properties. Compatible with all blue Light-emitting Light-curing devices.

✔ BPA-free ensuring safety and health

Studies show the interference of the compound Bisphenol-A (BPA) in the endocrine system and in fetal and childhood development, besides reproductive issues. Although the amount of BPA released in saliva by resinous materials is thousands of times lower than the minimum safest dose, there is a trend to eliminate BPA from restorative dental products.

✔ Exclusive APS Technology (Advanced Polymerization System)

Longer working time even under reflector Light, more efficient Light curing, increased mechanical properties, clinical longevity of restorations, high aesthetics and perfect mimicry.

✔ Universal-chroma

From bleach to D4 with only one Composite, for anterior and posterior teeth.

✔ Easy to visualize

The opaque shade before polymerization facilitates the visualization of the margins of the preparation.

VITTRA APS UNIQUE FLOW - RECOMMENDATIONS

✔ Base under direct restorations;

✔ Pit and fissure sealant;

✔ Repair of small enamel defects;

✔ Composite resin repairs;

✔ Making attachments for orthodontic aligners.

✔ Restoration of minimally invasive cavity preparations (including small occlusal restorations in infraocclusion);

✔ Tunnel-type preparation

✔ Bonding of tooth fragments;

✔ Non-carious cervical lesions;

Commercial Availability

Refill

• Syringe with 2g

• 10 applicator tips.

VITTRA APS UNIQUE FLOW - STEP BY STEP

STEP 1 OF 6

Isolate the operative field. Isolation must ensure a moisture-free field with good visualization of the location. If necessary, use absolute isolation.

STEP 2 OF 6

Carry out the cavity preparation according to the adhesive technique.

STEP 3 OF 6

Carry out the acid etching (enamel and dentin). Afterwards, wash with plenty of water, removing all the acid from the surface, and dry the enamel gently, leaving the dentin moist.

STEP 4 OF 6

Apply the adhesive according to the manufacturer’s instructions.

STEP 5 OF 6

Insertion of the Composite and Light-curing*: in case there is darkening exacerbated by the formation of tertiary dentin, staining by amalgam or other stains without a defined origin, is necessary to apply an opacifying Composite, in order to mask the darkening of the substrate. For the insertion of the restorative Composite, the incremental technique is recommended, as it allows for better performance of the material. Apply the material directly into the cavity with the applicator tip. Each layer should be up to 1.5 mm thick. Light Cure for 20 seconds**. *The Composite will only mimic the tooth color if there are surrounding walls and after curing. During insertion, the Composite appears more opaque, which will only resemble the tooth color after Light curing.

STEP 6 OF 6

For the finishing, use sandpaper discs or fine grit drills, and for polishing it is recommended to use felt discs and polishing pastes.

VITRA UNIQUE - THE REAL CHAMELEON EFFECT

There are several reasons to have a universal chroma Composite in your clinic!

• Excellent strength, polishing and shining;

• No need for shade selection, increased productivity and reduced stock;

• It follows the tooth shade after the dental whitening treatment;

• Available in two consistencies: conventional and fl uid.

From Bleach to D4 with a single Composite

Before and after polymerization