Heads up! 📦 No shipments will be going out until Thursday, the 26th.
We'll be back to our regular shipping schedule then. Thanks for your understanding!
WHIP MIX VPM2 Vacuum Mixer Wall Bracket #29342
Earn up to 81 rewards points with this product!
Join today and start earning rewards points and unlock exclusive savings with US Dental Depot's Customer Loyalty Rewards Program
Description
WHIP MIX - VPM2 VACUUM MIXER Wall Bracket
VACUUM Mixers ACCESSORIES
# 045-29342 - Mfg # 29342
Description:
The WHIP MIX Wall bracket is to be use in conjunction with the VPM2 VACUUM MIXER line
Installation on Bracket:
Preparation
The only hardware supplied with the unit is one #8-32 nut. See the instructions below for more information regarding hardware.
Mounting
Make sure the wall can support 20.4 kg (45 lbs.) of weight.
1. Mount the bracket to the wall using four 1/4" bolts, screws and lock washers.
2. Place the Bracket Clip on the back and bottom of the VPM2 with the screw hole facing down.
3. Slide the VPM2 down onto the wall mount bracket. (Make sure the place the unit is mounted can handle the weight.)
4. Install the #8-32 nut onto the threaded stud.
Note:
* Make sure the unit is anchored on wall studs, either directly or using a plywood board.
* The drive shaft must point downward.
* Keep a minimum distance of 9" (23 cm) between the bottom of the mixing ring and the bench or table.