Sterisil® AC+ System produces autoclave Water for areas with Water containing <500 PPM TDS. Sink top dispensing faucet or filler wand for easy filling of table top autoclaves. The AC+ connects directly to your municipal Water supply and produces up to 50 gallons per day of distilled quality Water for your instrument washers, autoclaves, and dental bottles.
• Eliminates the need for purchasing and storing distilled Water
• Produces up to 50 gallons of distilled quality Water with <10ppm TDS per day
• Output Water is suitable for any instrument washer or autoclave
• Class B UV treatment
• Reduces the elevated microbial load that inevitably occurs over time when storing Water in tanks
• Helps ensure processed Water is safe for dental unit waterlines
• Can be mounted under a sink or on the wall in a sterilization center
• User serviceable without a dental technician
• Audible and visual maintenance notifications
KEY FEATURES & USE
• Produces *“distilled quality” Water* (0 ppm total dissolved solids) for autoclaves and instrument washers.
• Connects directly to municipal Water supply.
• Capacity: up to 50 gallons/day (≈ 190 L/day)
• Multi-stage purification (including reverse osmosis, deionization, UV)
• Alerts (audio/visual) for cartridge replacement and System status.
• Compact footprint: ~ 20″ × 18″ × 5.5″ (W × H × D)
• Intended to support up to ~ 200 operatories (depending on Water usage).
CONSIDERATIONS / INSTALLATION NOTES
• Source Water constraints: acceptable until ~ 500 ppm TDS.
• Source pressure should be ~ 65-85 psi (≈ 4.5-6 bar)
• Use 1/4" tubing (LLDPE or PEX) downstream from the unit; no copper after the System.
• You'll need drainage and a standard sink or floor drain within ~ 20 ft (and lower elevation than unit).
• Electrical: 110 V AC, ~ 3 A, GFCI protected.
• Cartridge / maintenance schedule and replacement kits exist (e.g. "Sterisil AC+ Autoclave Water Cartridge Replacement Kit")