J MORITA - Lubrina 2 Automatic Handpiece Lubrication System - # 24K325ENG
9172_f.jpg)
9171_f.jpg)
9170_f.jpg)
Earn up to 2,727 rewards points with this product!
Join today and start earning rewards points and unlock exclusive savings with US Dental Depot's Customer Loyalty Rewards Program
Description
🗹 Automatic purging and Lubrication of a wide variety of equipment
🗹 New clean air-blow System
🗹 Reduced maintenance time and oil consumption
🗹 Up to 4 handpieces/attachments may be cleaned in the same cycle
🗹 Built-in chuck maintenance System for MORITA instruments
🗹 Compatible with 4-hole, 5-hole, and 6-pin connections
🗹 Unique dual Lubrication System
Fast and clean operation, plus compatibility with multiple brands of spray lubricant
Lubrina 2 automatically performs maintenance (Lubrication and cleaning) of handpieces and other equipment which are essential for daily practice. Because the Lubrication amount and service time suitable for each Handpiece are programmed into Lubrina 2, it can automatically perform maintenance of up to four handpieces in a short time. The clean air-blow System implements Lubrication and cleaning of the inside of the Handpiece thoroughly, and provides stable maintenance without variations by staff which can occur during manual Lubrication. Lubrina 2 accepts multiple brands of spray lubricant.
Features
Seamless Auto-Maintenance
• Cleans one turbine in approximately 20 seconds
• Oil usage amount is reduced to 1/4
• Faster maintenance with excellent cost savings
Since the air-blow System can remove residual water completely using clean air, the efficiency of Lubrication is enhanced with oil usage only 1/4 of that compared to manual Lubrication. Daily maintenance cost is therefore reduced. In addition, the System can remove surplus oil effectively, allowing maintenance in a short time.
Handpiece and spray compatibility
Example: One turbine and contra angle by Morita and one turbine and contra angle by another manufacturer.
By replacing the coupling, Lubrina 2 facilitates the maintenance of Tri Auto ZX2 and Root ZX II contra angles, air driven handpieces (ISO 9168/Type 3 joint) as well as all other contra-angles and straight handpieces (ISO 3964/E-Type joint). Lubrina is compatible with 4-hole, 5-hole, and 6-pin connections. With its dual Lubrication System, one or two different brands of spray may be used in the same cycle. Several brands of spray are compatible by using an optional spray holder adapter.
Clean Air-Blow System & Other Ease of Use Features
Double-conduit design achieves clean air
By employing the dual solenoid valves and clean air dedicated conduit, the System can supply clean air without a mix of oil. During the water removal process before Lubrication, the System removes the water in the head which maximizes Lubrication results. During idling after Lubrication, the surplus oil can be effectively removed by clean air.
Comparision of Lubrina 2 with an conventional product
Lubrina 2 (Clean Air-Blow System)
Conventional product*
Additional benefits and ease of use features of Lubrina 2
Easy chuck maintenance
For the turbine and 5x speed contra-angle Handpiece, it is essential to lubricate and clean the chuck which holds the bar.
Water removal during autoclaving
If autoclave is performed while a large amount of water is left in the conduit of the Handpiece, steam will not infiltrate and could cause a sterilization defect. To prevent this, clean air (without a mix of oil) is fed into the water feed, chip air conduit to remove the residual water, thereby reducing the possibility of a problem during autoclaving.
Surplus oil removal reduces idling time before practice
During Handpiece rotation, clean air removes the surplus oil which causes blow-out, and thus reduces the idling time necessary before use.
Reduces scattering of oil mist
The built-in oil mist suction mechanism draws in the oil mist generated during maintenance, thereby preventing the mist from scattering to nearby surfaces and devices. In addition, since oil mist is collected into the oil gathering tray, maintenance of the equipment is also easy.
Reduced operating sound
Lubrina 2 of fers a noise reduction of 15dB during operation compared to the original model.
Easy maintenance
The control panel is flat and the front door can be removed for easy access and cleaning.
Oil spray can delivery System
The low viscosity oil mist penetrates into the inside of the Handpiece head and delivers intense cleaning.
Configuration
Ordering Information
Warranty
• Lubrina 2 comes with a 2-year warranty.
Packaging:
• System includes: MORITA Lubricant Spray (2) (420ml ea), Oil Absorbent Tray Pad (1), Oil Absorbent Sheet (1), MORITA Spray Can Stands (2), Power Cord (1), Air Tube (1), Door Oil Absorbent Sheet (1), Front Door Sheet Stopper (1)
Lubrina 2 Product Number
• Lubrina 2 Handpiece Maintenance System (Order no. 24-K325ENG)
Accessories
Coupling Options
• 4H (MORITA Type) Coupling (Order no. 24-7376715)
• Alpha (MORITA Type) Coupling (Order no. 24-7376766)
• LS Coupling (TorqTech Series) (Order no. 24-7376774)
• KaVo® Coupling (MULTIflex / MULTIflex LUX) (Order no. 24-7376723)
• W&H® Roto Quick Coupling (Order no. 24-7376758)
• Sirona® R/F Coupling (Order no. 24-7376731)
• RZXII /TRZX2 Coupling (Root ZX II & Tri Auto ZX2) (Order no. 24-7376782)
• Tri Auto ZX Coupling (Order no. 24-7373325)
Spray Can Stands
• Standard (MORITA Spray 420 ml) (Order no. 24-7376952)
• KaVo® Spray* (500 ml), NSK® Pana Spray Plus* (480 ml), YOSHIDA Spray* (Note: For use with Pana Spray, flip stand.) (Order no. 24-7373392)
• Bien-Air® LUBRIFLUID Spray* (500 ml) (Order no. 24-7373694)
• W&H® Service Oil F1 Spray* (400 ml) (Order no. 24-7373651)
• Sirona® T1 Spray* (250 ml) (Order no. 24-7373422)
Lubricant Spray
• Multi Spray (420ml) (Order No. 24-5010201)
O-Ring Sets
• MORITA Alpha Coupling O-Ring Set (Order No. 24-5811550)
• LS Coupling O-Ring Set (Order No. 24-7376820)
• MORITA 4H Coupling O-Ring Set (Order No. 24-7373850)
• Kavo Coupling O-ring Set (Order No. 24-7376871)
• W&H Coupling O-ring Set (Order No. 24-7376928)
• Sirona Coupling O-ring Set (Order No. 24-7376898)
• RZXII / TRZX2 Coupling O-ring Set (Order No. 24-7373944)
• Tri Auto ZX Coupling O-ring Set (Order No. 24-7373686)
• Coupling Rubber Gasket (Order No. 24-5811831)
Other Accessories/Replacement Parts
• Front Door Sheet Stopper (Order No. 24-7376979)
• Door Oil Absorbent Sheet (5) (Order No. 24-7376839)
• Oil Absorbent Sheet (5) (Order No. 24-7376847)
• Oil Absorbent Tray Pad (5) (Order No. 24-7373465)
• Power Cable (Order No. 24-7376962)
• Air Tube 6 x 4mm (Order No. 24-7893787)
Configuration
Brand name
Model
Power voltage
Power consumption
Maximum input air pressure
Air pressure used
Consumed air flow rate
Weight
External dimensions (WxDxH)
Lubrina 2
HIM-2
AC 100V-240V 50-60Hz
10-25 VA
0.7 MPa max.
0.3-0.5 MPa (recommended 0.4 MPa)
60-100 NL / min (0.3-0.5 MPa)
Approx. 17 1/2 lbs. (8 kg)
12" x 12" x 14" (300×300×365mm)
Dimensional outline drawing / Installation clearance in inches)
Brochures ( Downloads )
