Description

MESTRA - GEISSER Automatic Polymerizating
Pressure Pot No Heater
# 417732- Mfg # 030425

Features:
Polymerizing Pot with high capacity tank (up to 6 litres), which allows to accommodate a considerable number of elements to polymerize. By means of an electronic control, temperatures can be regulated and maintained according to the times defined by the user.

CAPACITY

“You will have no problems to fit your jobs inside”

At MESTRA, we love small machines, because we know that space is limited in modern dental laboratories. However, we are categorical that this reduction in size may under no circumstances affect the properties and operability of the device, at all.

The Autopol polymeriser faithfully complies with this doctrine: a tank of generous dimensions has been chosen for the design (6 litres and 210 mm diameter), comfortably meeting the production needs of a medium/large laboratory. We are certain that with such a large volume, you will have no problems to fit your jobs inside

SAFETY

“We are talking about a machine which brings together Pressure and temperature”

It is well known that safety is one of the most important aspects for the MESTRA design team. But when the matter at hand is a machine that combines Pressure and temperature, our concern for safety intensifies. The solution provided by our engineers is, once again, ingenious: to minimise the risks that Pressure implies, they have opted for a tank WITHOUT WELDING, with a simple hole in the centre of the bottom, because that is where the lowest forces are exerted.

This configuration significantly reduces the risks of breakage of the tank from the effect of Pressure. Nevertheless —just in case—, three further safety valves take charge of acting in the case of problems.

The electrical circuit follows the same philosophy. The heating elements have their operating temperature limited to 230°C by means of two heat sensors and a piece of software designed with safety criteria. By this strategy, the risk of accidents has been reduced to a minimum.

VERSATILITY

“At MESTRA, we have decided to construct a universal machine”

Automatic low-Pressure polymerisers have traditionally been manufactured with criteria to adapt to the requirements of one specific material present on the market. Their temperatures are pre-established, making it very difficult to adapt the parameters of these machines to a new material.

Nobody can predict the future, and so no-one knows what new materials will appear on the market within a short

period of time, nor, most importantly, what polymerisation requirements they will demand.

Characteristics:

Height: 350 mm

Width: 360 mm

Depth: 400 mm

Weight: 5 kg

Operational Pressure: 2 bar

Maximum temperature: 100 ºC

Tank capacity: 6 L

Heating power: 600 W12 lbs. - ( 5.4 Kg )