FGM - WIT ESSENTIAL XTRA 7.5% KIT Oxygen Peroxide TAKE HOME - # 4000055124
13120_f.jpg)
13119_f.jpg)
Earn up to 32 rewards points with this product!
Join today and start earning rewards points and unlock exclusive savings with US Dental Depot's Customer Loyalty Rewards Program
Description
WIT ESSENTIAL XTRA KIT
Tooth Whitening, Take Home FGM
DESCRIPTION
Hydrogen peroxide whitening gel at 7.5%, and 10% for supervised at-home use.
• Potassium nitrate and sodium fluoride as desensitizing agents.
• Contains calcium.
Wīt ESSENTIAL XTRA is a 7.5% and 10% hydrogen peroxide-based dental Whitening gel for take-home treatment. With application times adaptable to the patient’s routine, it goes beyond Whitening, preventing demineralization and reducing hypersensivity. Its ideal viscosity guarantees Whitening without leaks or waste. It’s the perfect choice for achieving high tooth Whitening in a reduced daily wearing time.
FEATURES:
• 7,5% and 10% hydrogen peroxide teeth Whitening gel for effective Whitening
• Double desensitizing action
• Contains calcium
• Excellent viscosity
• Shorter daily wearing time: 1 hour to 30 minutes daily.
BENEFITS:
Double Desensitizing Action: Neural action of potassium nitrate and occlusive sodium fluoride. Potassium nitrate is an effective agent in the treatment of hyperesthetic dentin. Its action is based on the fact that the increased concentration of extracellular potassium depolarizes the membranes of nerve fibers, blocking the passage of the stimulus, reducing hypersensitivity.
Quickness: Shorter daily wearing time: 7,5%: 1 hour a day, 10%: 30 minutes a day
Calcium: Prevents demineralization and reduces hypersensitivity.
RECOMMENDATIONS:
• Whitening of vital teeth using the at-home whitening technique supervised by a dentist.
COMMERCIAL AVAILABILITY:
KIT - Only for 7.5% concentrations
• 4 syringes with 3g of gel each
• 4 applicator tips
• 1 tray case
• 2 vinyl plates of 1mm for tray preparation
• Instructions for the patient and the professional
STEP BY STEP
STEP 1 OF 8
Take the teeth shade so that the dentist and the patient can have a comparison parameter for the whitening. Recording of teeth shade can be made using a shade guide or a photograph.
STEP 2 OF 8
Molding: molding can be made with alginate and must properly copy all teeth that will be whitened.
STEP 3 OF 8
Mold is made of stone-gypsum, in order to prevent bubbles. It is not necessary to relief the model to create gel shells.
STEP 4 OF 8
Place the 1mm acetate plate Whiteness Plates for Molds (FGM) into the thermal laminator until forming a slight bending due to the heat. Then, pull the plastic state plate over the gypsum model, so the suction can thermal format the mold into the model. The plate’s removal must be made after it has fully cooled down.
STEP 5 OF 8
After removing the mold from the model, trim it to cover 1 to 2mm of the gums margin.
STEP 6 OF 8
Mold test: the mold must not compress the soft tissue, nor present excessive gaps.
STEP 7 OF 8
Show to the patient the quantity of gel that should be applied to the tray. One drop of gel must be put into the areas corresponding to the vestibular faces of the teeth that will be whitened. Wearing time: 2 hours per day for 4% concentration; 1 ½ hour per day for 6% concentration; 1 hour per day for 7.5% concentration; and 30 minutes per day for 10% concentration.
STEP 8 OF 8
Monitor the patient weekly until completing the treatment. Record the final shade achieved.