ADS Epoxy Resin Kit - 50gr BLUE - Fast ( 3-5-5 hs ) - 12 pre measured units - 12 jars+12 syr hardener + 12 mixing tips (resina+endurecedor) Epoxy Resin &Hardener) Last months once is opened - Shrink 0.001 - #8000-50-BE-FAST Improved Type 8000 can be trimmed and sawed with ease- yet is extremely hard - Does not expires - Doesnt stick on the saw - short time to be ready -

ADS - Epoxy Resin - 50 gr KIT Fast
Epoxi & Plastic die materials
# 112449 - Mfg # 8000-50

Features:

* Provides excellent dimensional stability.
* Can be trimmed and sawed with ease, yet is extremely hard.
* Holds delicate details for consistent accuracy.
* Bubble reducing formula is available in all popular colors.
* Colors are carefully selected to facilitate reading of margin details and prevent eye strain and fatigue.
* Dies can be demolded and used in 3 to 3 1/2 hours.
* Used year after year in high production labs for consistently accurate restorations.
* No need to centrifuge.
* Never expires
* Does not sticks to the saw blade

Quantity: each KIT contains

* 12 jars of Epoxy 50 gr
* 12 syringes of Hardener
* 12 mixing sticks and instructions

Troubleshooting:

* If you fell the resin is too hard and that is doesn´t flow properly make sure you mix all he syringe with the resin for at least 2 minutes
* The harder you mix it, the warmer the resin will be and the better flow you will get
* Warm up the resin for 2-3 minutes under a light lamp, or 5-6 seconds in a microwave
* This will warm up the resin enough to make it flow perfectly