Heads up! 📦 No shipments will be going out until Thursday, the 26th.
We'll be back to our regular shipping schedule then. Thanks for your understanding!
XPS-TRILOBE IMPLANTS
Compatible with Nobel Replace Select
XPN Implants are made with pure Titanium 4
RBM Implants ( Reasorbable Blast Media )
RBM, or reasorbable blast media, has been utilized for over 15 years in the dental implant industry.
* This surface treatment is designed to roughen the implant surface without leaving the residual embedded blast particles or debris in the treated substrate. To achieve the desired roughening the implant is blasted with suitable hardened particles of Hydroxyapatite (beta-Tricalcium Phosphate, Alpha Tcp, TTcp and Calcium Phosphate (CPP) and then subsequently dissolved from the surface with a defined passivation treatment. Surface roughness between Ra 1.2 - 1.5 is consistently achieved
* The result is a rougher implant surface then traditional acid etch treatment providing a greater surface area for osseointegration, improved retention characteristics, increased biological fixation, and maximizing implant-to-bone contact.
Hybrid design provides to the implant fixture the advantages of a textured surface and a polished 2mm collar that helps maintaining the soft tissues
MAIN FEATURES :
* Conical design
* Self-Tapping
* Micro-Thread on first millimeters
* Compressive design for immediate load techniques
* Polished first 2 millimeters is gentle with soft tissue
* Platform switch
* Double packaging similar to NR
* Packaging Color Coded
* 3 diameters available - 3.5 4.3 & 5.0
* Multifunction Implant Holder/Carrier made in Titanium 2 , that works as a Carrier, Transfer and straight abutment
* Gamma Sterilized
Implant device made of Titanium 4
Implant Carrier made of Titanium 2
Fixation Screw made of Titanium 5
NEEDED BURS / DRILL
All pre existing drill can be used
We recommend XPS TRILOBE last Conical drill
NEEDED INSTRUMENTS
Same instruments than used for NR
Wrench ( Square engagement )
Fixation Screw 1.2mm (0.48in )
Screwdriver 0.048in 1.2mm for RP and WP and
Screwdriver 0.035in 0.9mm for NP
1 - 11 of 11 results