Description

SHOFU - Compomaster COARSE Assorted HP
Silicon Composite Polishers
# 111955 - Mfg # 120C

Features:
Compomaster COARSE and Compomaster silicone polishers contain ultrafine diamond particles, embedded in an unique silicone mix.
The combination of Compomaster COARSE and Compomaster polishers with different particle sizes is an efficient concept for a homogenous surface treatment.
Compomaster COARSE polishers had been designed for contouring and prepolishing rough Composite surfaces in one step.
The prepared surfaces can be polished with the Compomaster instruments.

Indication:
* Compomaster COARSE: contouring, finishing, and pre-Polishing of Composite
* Compomaster: Polishing of Composite

Note:
When using polishers intra-orally, operate each polisher under dry conditions with intermittent strokes and supply compressed air to avoid an excess overheating of the Composite and to protect the pulp.
* Contouring / Finishing: Dura-Green, Dura-Green Fin
* Finishing / Pre-Polishing: Compomaster COARSE
* Polishing: Compomaster
* Superpolishing: Composite Polishing paste or SuperBuff Polishing disk

Benefits:
* Silicone polisher with integrated diamond particles
* Abrasive grains and binder exactly coordinated
* Precision running
* Exactly centred
* Optimal contact-pressure-to-revolution-ratio
* Customizable
* No need for additional Polishing paste
* Particularly long operation life
* Vibration-free action
* Low heat generation

Material properties:
Working end
Silicone with integrated, ultrafine diamond abrasive particles
Shank
Stainless steel
Recommended speed range
* 5,000 - 15,000 min-1 (HP and CA shapes)
* 5,000 - 10,000 min-1 (unMounted Stones wheel)
The recommended speed range varies according to the type of shank and the shape and size of the working end.
The maximum permitted speed should not be exceeded!
* 1 Bullet
* 1 Mini Point
* 1 Kn7
* 1 Wh6