RENFERT SIMPLEX filaments STUDY Model 800g #473957

Mfg #17350100

Filament for orthodontic Model fabrication
The high-quality special filaments are suitable for the specific requirements of the dental industry: they have excellent mechanical and physical properties and do not pose a risk to health. The high consistency and dimensional accuracy of the filaments enable detailed print quality. You receive a defined filament selection designed for the respective area of application.

Advantages
Work at a high level with high quality materials.
Work reliably with a selection of filaments matched to the indication area and printer.
Time-saving and health-friendly fabrication of 3D MODELS – no post-processing, no cleaning, no curing.

Details

• 100% free from irritants – no harmful vapors during printing process.
• Biofilament is recyclable and industrially compostable.
• Excellent mechanical and physical printing properties such as layer and print bed adhesion.
• High-quality, process-stable printing and detailed print result thanks to uniform diameter (1.75 mm) and roundness along the entire length of the filament.
• No post-processing with chemicals and curing unit necessary.
• Sustainable, environmentally friendly, and cost-effective printing.
• Colorfast, UV-resistant.

Made in Germany.

SIMPLEX STUDY Model #17350100
The bio filament SIMPLEX STUDY Model offers high detail reproduction and sharpness for precise planning and diagnostic MODELS. Promotes pleasant working, thanks to having no irritating components. Does not produce unpleasant vapors during the printing process, is recyclable and industrially compostable.
Bio filament Ø 1.75 mm, 1 x 800 g (28 oz.), white
Printing temperature: 190-230°C (374-446°F)
Bed temperature: 50-70°C (122-158°F)

SIMPLEX multi-use Model #17350600
The bio filament SIMPLEX multi-use Model provides a natural surface effect with its high hard-gypsum content. Offers high detail reproduction. Promotes pleasant working, thanks to having no irritating components. Does not produce unpleasant vapors during the printing process, is recyclable and industrially compostable. It can be optimally worked with rotary instruments or a scalpel.
Plaster filament Ø 1.75 mm, 1 x 800 g (28 oz.), plaster white
Printing temperature: 185-220°C (365-428°F)
Bed temperature: 50-70°C (122-158°F)

SIMPLEX aligner Model #17350300
The special filament SIMPLEX aligner Model is tailored to the special requirements of aligner production and the thermoforming technique*. Promotes pleasant working, thanks to having no irritating components. Generates no unpleasant vapors during the printing process. No post-processing, no annealing required.
*excluded: Zendura Clear Aligner & Retainer Material
Heat-resistant special filament Ø 1.75 mm, 1 x 800 g (28 oz.), white
Printing temperature: 235-255°C (455-491°F)
Bed temperature: 80-95°C (176-203°F)

SIMPLEX working Model #17350200
The biofilament SIMPLEX working Model is designed for the digital production of working MODELS and offers high detail reproduction. Promotes pleasant working, thanks to having no irritating components. Does not produce unpleasant vapors during the printing process, is recyclable and industrially compostable.
Bio filament Ø 1.75 mm, 1 x 800 g (28 oz.), viridian green
Print temperature: 190-230°C (374-446°F)
Bed temperature: 50-70°C (122-158°F)

3-YEAR WARRANTY All RENFERT Laboratory devices have a three year guarantee. * If at some point something does not function, you still have the comforting assurance that RENFERT will find a solution to the problem under the guarantee.