Earn up to 295 rewards points with this product!

Join today and start earning rewards points and unlock exclusive savings with US Dental Depot's Customer Loyalty Rewards Program

Description

AMANN GIRRBACH - MoguCera C Disc 10mm - # 138110

Description:

With the introduction of the Ceramill Matik, AMANN GIRRBACH offers a milling machine for processing hard metal CoCr blanks. We recommend the exclusive use of CoCr blanks validated by AMANN GIRRBACH with the Ceramill Matik, as the MoguCera C Disc from Scheftner Dental was tested and validated on the Ceramill Matik. This ensures a safe process and consistently good results when using the hard metal CoCr blank. The product characteristics of the MoguCera C Disc are virtually identical to those of Ceramill Sintron. This ensures a known and safe process for the further processing of the MoguCera C Disc. Due to the excellent metal-ceramic bond, the MoguCera C Disc can also be used for frames for subsequent ceramic veneering.

Validated process when using the MoguCera C Disc on the Ceramill Matik

Excellent metal-ceramic bond for possible ceramic veneering of the CoCr restoration

Excellent strength values, bonding strength and biocompatibility

Highest process safety due to homogeneous and distortion-free frames

Crowns and bridges, fully anatomically and anatomically reduced

Telescopes

Multi-pontic screw-retained constructions on Ti-bases

Individual abutments on Ti-bases

Anatomically reduced and fully anatomical crown and bridge frameworks in the anterior and posterior region.

Data & Composition

Tensile Strength	597 MPa
Density	8,3 g/cm3
Vickers Hardness	288HV10
Elongation at rupture	12%
Yield strength (Rp 0.2)	413 MPa
E-modulus	206 GPa
CTE (20-500°C)	14.5 * 10-6K-1
CTE (20-600°C)	14.8 * 10-6K-14
Laser-weldable	Yes