-
PRO-SPLINT Splint Material by KEYSTONE
KEYSTONE - Pro-Splint Material #9640961
Surgical Splint MaterialOur new Pro-Splint splint material is a thicker option to work with with fine and hard splints, surgical trays, retainers and whitening trays. Carries less risk of bubble formation than other splint materials due to its thickness, and it becomes completely transparent once the process is finished heating.
* Clear material
* 5" x 5" ( 127 x 127mm ) sheets
* Acrylic sticks to KEYSTONE - PRO-Splint Material
* Vacuum forming material
* Pro-Splint Material Available in 25pk or 625pk
GETTING BUBLES with KEYSTONE Pro-Splint Material?
IF YOU ARE GETTING THESE IMAGES. IT IS ALWAYS THE CONSEQUENCE OF :
MOIST DURING STORAGE + OVER HEATED : meaning TOO CLOSE TO THE HEATING ELEMENT OR HEATED TOO FAST
1) Lower the sheet to the closest position to the model
2) Place the sheet as far as you can from the heating element
3) Turn on the heating element at the lowest possible power
Go moving IN & OUT the heating platform from the Sheet, so heating is slower and even. Let the heat move through the sheet material . Do not rush it
4) Start the vacuum as soon as the sheet STARTS to bend in the middle ( 3-5 mm bending is enough ) I the sheet bends 1cm ( 10mm ) it is already too hot
this is too much
wrong !!
5) DO NOT wait until your perception says : NOW. You must launch the vacuum way before your instinct tells you.
1 - 3 of 3 results