95mm ZIRCONIA DISCS MONOLAYER Mono by DIGITECH-Zircon

95mm ZIRCONIA Discs CAD/CAM for ZIRKINZAHN

Characterisics:
* First grade Zirconia powder
* Shrinkage adjusted for 20% -
* Compensation 1.25
Physical Qualities:
* Bending Strength:
HS High Strengh 1400 Mpa
ST Super Translucent 1200 Mpa
AT Anterior Translucency 600 Mpa ( TT Total Translucency )
* Vickers Hardness: 12.8 Gpa

Colors:
* Our Zirconia blocks, are Standard LL0.5 .
* For darker shades ECCO liquid Coloring is available in the following: *LL1
*LL2 *LL3 *LL4 *LL5 as the darkest shade.
* Coloring for Full contour is also available in 16 Vita shades

Firing Chart:
* Starting temperature: Room Temperature
* Temperature Heating rate 4 Celcius per minute
* Sinterization temperature
HS and ST 1530 Celsius 2 hours
AT  1450 Celcius 2 hours
* Temperature Coling Rate 4 Celcius per minute
* Total Cycle time: 16 hours .Then open door, don?t forget to decontaminate your sinter oven once a week, or at least once a month. This advice is for every sinter oven in the market, regardless of brand name, or origin.

#Usdd95

#ZirkonZahn

ZIRKONZAHN is a trademark of ZIRKONZAHN GMBH