IBO Closed-Tray Impression Coping for conventional Impression workflows, reference HE-48710, Closed Tray Imp HE-48710. Used with a standard (non-perforated, Closed) Impression Tray; the Coping remains on the implant when the Tray is removed and is then transferred to the Impression for analog mounting in the laboratory.

Used at the Impression visit in conventional analog workflows for single-implant or simple cases where a fully passive multi-unit master model is not required. The Coping is screwed onto the implant, the Closed-Tray Impression is taken, the Tray is removed leaving the Coping in the mouth, the Coping is then unscrewed and re-seated into the Impression material for laboratory analog mounting.

Used with IBO implant platforms per the MFG# prefix (HEI / HEC / HE). Confirm platform pairing via the IBO catalogue.

Machined from medical-grade Ti-6Al-4V ELI titanium (Grade 5), ASTM F136 / ISO 5832-3, selected for biocompatibility, mechanical strength and chemical stability in the oral environment.

All materials and processes comply with current regulations and are subject to full traceability from raw material to final validation.

Supplied in the manufacturer's validated condition for clinical use. Follow the package insert and IBO Instructions for Use for handling, storage and any chairside preparation steps. Do not modify the geometry or surface in any way; doing so compromises both clinical fit and regulatory clearance.

Single-use device. Single patient, single procedure. Discard unused components per local biohazard regulations.

IBO operates under ISO 13485:2016 quality management for the manufacturing of medical devices, holds the AEMPS Spanish Agency of Medicines and Medical Devices licence, and every IBO component carries the CE marking MDR, assessed by a Notified Body.