SHOFU Ceramaster Coarse ASSORTED Kits / Set CA contrangle - #125C
1984_f.jpg)
Earn up to 64 rewards points with this product!
Join today and start earning rewards points and unlock exclusive savings with US Dental Depot's Customer Loyalty Rewards Program
Description
SHOFU - Ceramaster Coarse Assorted Ca
Silicon Porcelain POLISHERS
# 111960 - Mfg # 125C
Features:
For Preparation of CERAMIC Restorations
Ceramaster Coarse and Ceramaster silicone POLISHERS contain ultrafine diamond particles, embedded in a unique silicone mix.
The combination of Ceramaster Coarse and Ceramaster POLISHERS with different particle sizes is an efficient concept for a homogenous surface treatment.
Ceramaster Coarse POLISHERS are designed for a quick finishing and pre-polishing of porcelain restorations in one step only.
They particularly show their forte when adjusting CERAMIC coping margins made from materials such as aluminium oxide and zircon oxide.
For superpolishing Ceramaster POLISHERS are recommended.
When using the Ceramaster POLISHERS there are no need to use additional polishing paste, as the high shine is produced by using the diamond-impregnated silicone POLISHERS themselves.
Indication
Ceramaster Coarse: finishing and polishing of porcelain
Note
When using POLISHERS intra-orally, operate each polisher under dry conditions with intermittent strokes and supply compressed air to avoid an excess overheating of the CERAMIC and to protect the pulp.
Polishing: Ceramaster Coarse
Superpolishing: Ceramaster
Benefits
* Silicone polisher with integrated diamond particles
* Abrasive grains and binder exactly coordinated
* Precision running
* Exactly centered
* Optimal contact-pressure-to-revolution-ratio
Customizable
* No need for additional polishing paste
* Pressure controlled working
* Chip free working
* Particularly long operation life
* Vibration-free action
* Low heat generation
* Material properties
Working end
Silicone with integrated, ultrafine diamond abrasive particles
Shapes and sizes
* 6 shapes and sizes and 1 unmounted wheel
* HP = Handpiece: 4 shapes
* CA = Contra Angle: 4 shapes
Shank
Stainless Steel
Shank shapes
CA = Contra Angle
Recommended speed range
* 10,000 - 15,000 min-1 (HP and CA shapes)
* 5,000 - 10,000 min-1 (unmounted wheel)
The recommended speed range varies according to the type of shank and the shape and size of the working end.
is an Authorized SHOFU Dealer in US.